Introduction
BOSCH PLE-10M2-EU Mixer, 2 Channels
Business Type: PLE-10M2-EU
Product number: F.01U.066.938

PLE-10M2-EU Mixer, 2 Channels
6-way microphone/line input and 3-way music source input
100 V, Telephone and Call Station Input (with Priority and VOX)
2-zone and 2-channel operation
Voice Activation Emergency Control Button
Built-in 2-tone prompt tone and 7 other prompt tones are available for call stations to choose from.
Output Interface for Line Output, Music Output Only and Insertion Point
24 V standby input with built-in 24 V charger
Individual Sound Controller for Microphone and Music Source
Main power supply
Voltage 115 - 230VAC + 10%, 50/60Hz
Power consumption 24 VA
Battery power supply
Voltage 24 VDC, +10%/15%
Current 1A
Power Consumption (Maximum) 1A
performance
Frequency response 50 Hz to 20 kHz (+0/3 dB)
Distortion < 0.1% (at rated output power), 1 kHz
Bass Control Max - 12/+12 dB (Frequency and Settings Dependent)
Tweeter control max. - 12/+12 dB (Frequency is set related)
RJ-45 input 2x
Call station input for PLE-2CS (MM)
Wall panel input for PLE-WP3S2Z
Microphone/line input 6x
Input 1 (i.e. press-and-speak contact, with automatic volume highlighting function) 5-pin European, balanced, phantom 3-pin XLR, balanced, phantom
Input 2-6 (VOX enabled on input 2 [with push-in function]) 3-pin XLR, balanced, phantom
Sensitivity 1 mV (microphone); 1 V (line)
Impedance > 1 kohm (microphone); > 5 kohm (line)
Dynamic range 100 dB
Signal-to-noise ratio (flat at maximum volume)>63 dB (microphone)>70 dB (line)
Signal to Noise Ratio (Minimum Volume/Flat at Silence)>75 dB
CMRR > 40 dB (50 Hz to 20 kHz)
Speech filter - 3 dB (315 Hz), high pass, 6 dB/oct
Phantom power supply 16 V, through 1.2 kiloohms (microphone)
Speech filter - 3 dB (315 Hz), high pass, 6 dB/oct
VOX (input 1 and 2) trigger time 150 ms; release time 2 seconds
Music input 3x
Connector Lotus Blossom, Stereo to Mono Channel
Sensitivity 300 mV
Impedance 22 kohm
Signal-to-noise ratio (flat at maximum volume)>70 dB
Signal to Noise Ratio (Minimum Volume/Flat at Silence)>75 dB
Remains > 25 dB
Emergency/Telephone 1x
Connector 7-pin European pluggable screw terminal
Telephone input sensitivity 1 V - 10 V (adjustable)
Emergency input sensitivity 100 V (adjustable)
Impedance > 10 kohm
Signal-to-noise ratio (flat at maximum volume)>65 dB
VOX threshold 50 mV; trigger time 150 ms; release time 2 seconds
Insert 1 x
Connector Lotus Blossom
Rated level 1V
Impedance > 10 kohm
Area Output/Main Output/Music Output 3x
Connector 3-pin XLR, equalization
Rated level 1V
Impedance < 100 ohm
Dimensions (high x width x depth) 100 x 430 x 270 mm (19 inches wide, 2U high)
Installation of stand-alone, 19-inch rack
Color carbon black
It weighs about 4.5 kg.
Working temperature - 10 C to + 45 C
Storage and transportation temperatures - 40 C to + 70 C
Relative humidity < 95%
Business Type: PLE-10M2-EU
Product number: F.01U.066.938

PLE-10M2-EU Mixer, 2 Channels
6-way microphone/line input and 3-way music source input
100 V, Telephone and Call Station Input (with Priority and VOX)
2-zone and 2-channel operation
Voice Activation Emergency Control Button
Built-in 2-tone prompt tone and 7 other prompt tones are available for call stations to choose from.
Output Interface for Line Output, Music Output Only and Insertion Point
24 V standby input with built-in 24 V charger
Individual Sound Controller for Microphone and Music Source
Main power supply
Voltage 115 - 230VAC + 10%, 50/60Hz
Power consumption 24 VA
Battery power supply
Voltage 24 VDC, +10%/15%
Current 1A
Power Consumption (Maximum) 1A
performance
Frequency response 50 Hz to 20 kHz (+0/3 dB)
Distortion < 0.1% (at rated output power), 1 kHz
Bass Control Max - 12/+12 dB (Frequency and Settings Dependent)
Tweeter control max. - 12/+12 dB (Frequency is set related)
RJ-45 input 2x
Call station input for PLE-2CS (MM)
Wall panel input for PLE-WP3S2Z
Microphone/line input 6x
Input 1 (i.e. press-and-speak contact, with automatic volume highlighting function) 5-pin European, balanced, phantom 3-pin XLR, balanced, phantom
Input 2-6 (VOX enabled on input 2 [with push-in function]) 3-pin XLR, balanced, phantom
Sensitivity 1 mV (microphone); 1 V (line)
Impedance > 1 kohm (microphone); > 5 kohm (line)
Dynamic range 100 dB
Signal-to-noise ratio (flat at maximum volume)>63 dB (microphone)>70 dB (line)
Signal to Noise Ratio (Minimum Volume/Flat at Silence)>75 dB
CMRR > 40 dB (50 Hz to 20 kHz)
Speech filter - 3 dB (315 Hz), high pass, 6 dB/oct
Phantom power supply 16 V, through 1.2 kiloohms (microphone)
Speech filter - 3 dB (315 Hz), high pass, 6 dB/oct
VOX (input 1 and 2) trigger time 150 ms; release time 2 seconds
Music input 3x
Connector Lotus Blossom, Stereo to Mono Channel
Sensitivity 300 mV
Impedance 22 kohm
Signal-to-noise ratio (flat at maximum volume)>70 dB
Signal to Noise Ratio (Minimum Volume/Flat at Silence)>75 dB
Remains > 25 dB
Emergency/Telephone 1x
Connector 7-pin European pluggable screw terminal
Telephone input sensitivity 1 V - 10 V (adjustable)
Emergency input sensitivity 100 V (adjustable)
Impedance > 10 kohm
Signal-to-noise ratio (flat at maximum volume)>65 dB
VOX threshold 50 mV; trigger time 150 ms; release time 2 seconds
Insert 1 x
Connector Lotus Blossom
Rated level 1V
Impedance > 10 kohm
Area Output/Main Output/Music Output 3x
Connector 3-pin XLR, equalization
Rated level 1V
Impedance < 100 ohm
Dimensions (high x width x depth) 100 x 430 x 270 mm (19 inches wide, 2U high)
Installation of stand-alone, 19-inch rack
Color carbon black
It weighs about 4.5 kg.
Working temperature - 10 C to + 45 C
Storage and transportation temperatures - 40 C to + 70 C
Relative humidity < 95%
More Products