BOSCH FMC-210-DM-G-Y Manual call point indoor, yellow
Update: 2020/4/15 View:
- Brand: BOSCH
- Type: FMC-210-DM-G-Y
Introduction
BOSCH FMC-210-DM-G-Y Manual call point indoor, yellowCommercial Product No.: FMC-210-DM-G-Y | Product No.: F.01U.011.961
Adjustment after alarm triggering
Individual identification thanks to automatic or manual detector addressing
Indicator LED for alarm or for inspection evaluation
Query routines with evaluation and multiple transmission
Maintains LSN loop functions in the event of wire interruption or short-circuit thanks to two integrated isolators
show less
Select variant
current tab: Technical Specification
Parts Included
Downloads
Key Specifications
Full specifications
Operating voltage (VDC) 24 (15 to 33)
Current consumption (mA) 0.4
Dimensions W x H x D (mm) 135 x 135 x 40
Housing material Plastic ASA
Colors Red RAL 3001 Blue RAL 5005 Yellow RAL 1003 Green close to RAL 6002
Weight (g) Approx. 235
Degree of protection (IEC 60529) Form H IP 54
Degree of protection (IEC 60529) Form G IP 52
FMC‑210‑DM‑G‑R EN 54-11
FMC‑210‑DM‑H‑R EN 54-11
FMC‑210‑DM‑G‑Y EN 12094-3
Operating temperature Form H (°C) -25 to 70
Operating temperature Form G (°C) -10 to 55
The FMC-210-DM Double-action Call Points are used for manual triggering, and can be used in the Local SecurityNetwork LSN and LSN improved. Form H Manual Call Points are designed for outdoor deployment, form G Manual Call Points are designed for indoor deployment.
In the event of an alarm, the glass pane (2) is broken first, then the manual call point (3) is pressed hard. This activates the microswitch for alarm triggering and the indicator LED (4) blinks. A mechanism holds the pressed call point down. The manual call point can be reset with the reset lever (5) or by closing the door of the manual call point (1). The indicator LED (4) goes out.
This does not reset the alarm on the fire panel.Individual call point identification with display of the
call point address on the fire panel ensures the quick location of the triggered call point.
Variants
The designs of the manual call points for outdoor and indoor use are identical. The manual call points for
indoor use (form G) are available in red, blue, yellow,and green. The manual call points for outdoor use
(form H) are available in red and blue.Form H manual call points are equipped with an especially resistant PC board layered with parylene.
Notice
The key must be ordered separately.
Improved LSN features
The manual call points offer all the features of the improved LSN technology:
• Flexible network structures, including T-tapping without additional elements
• Up to 254 LSN improved elements per loop or stub line
• Automatic or manual detector addressing selectable via rotary switch, in each case with or without autodetection
• Shielded and unshielded cables can be used
• Cable length up to 3000 m (with LSN 1500 A module)
• Downwards compatibility to existing LSN systems
and control panels
Certifications and approvals
Type Number Complies with
FMC‑210‑DM‑G‑R : EN 54-11:2001/A1:2005, EN 54-17:2005
FMC‑210‑DM‑H‑R : EN 54-11:2001/A1:2005, EN 54-17:2005
FMC‑210‑DM‑G‑Y : EN 12094-3:2003, EN 54-17:2005
Region Regulatory compliance/quality marks
Germany VdS G 206098 FMC-210_DM-G-R/-HR_G206098 VdS G 206099 FMC-210_DM-G-Y_G206099
Europe CE FMC-210-DM-G-B/-H-B/-SM-G-B CE FMC-210_DM-G-R/-H-R/-SM-G-R CE FMC-210-DM-G-Y / EST-G-B CPD 0786-CPD-20293 FMC-210-DM-G/H-R CPD 0786-CPD-20244 FMC-210-DM-G-Y
Poland CNBOP 1505/2013 FMC-210 DM-G-R, FMC-210 DM-H-R
Ukraine MOE UA1.016.0070338-11 FMC-210-DMG-R_FMC-210-DM-H-R_FMC-210-DM-GR-A
Slovakia EVPÚ SK08-ZSV-0071 FMC-210-DM,FMC-210-EST
Installation/configuration notes
• The device must be mounted visibly along escape and rescue routes (e.g. exits, passageways, stairwells) and be easily accessible.
• An installation height of 1400 mm ±200 mm,measured from the middle of the device to the floor,must be maintained.
• The device must be adequately illuminated by sunlight or another light source (including emergency
lighting if present).
• The maximum number of LSN elements that may be connected depends on their current consumption from the LSN data line. The limit values should be taken from the product information supplied with the fire panel used.
• Additional norms, guidelines, and planning recommendations with respect to installation location, etc. must be taken into account (see fire detector manual).
• The regulations of the local fire services must be observed.
Technical specifications
Electrical
Operating voltage (VDC) 24 (15 to 33)
Current consumption (mA) 0.26
Mechanics
Dimensions W x H x D (mm) 135 x 135 x 40
Housing material Plastic ASA
Colors Red RAL 3001
Blue RAL 5005
Yellow RAL 1003
Green close to RAL 6002
Weight (g) Approx. 235
Environmental
Degree of protection (IEC
60529) Form H IP 54
Degree of protection (IEC
60529) Form G IP 52
FMC‑210‑DM‑G‑R EN 54-11
FMC‑210‑DM‑H‑R EN 54-11
FMC‑210‑DM‑G‑Y EN 12094-3
Operating temperature Form H (°C) -25 to 70
Operating temperature: Form G (°C) -10 to 55
Ordering information
FMC-210-DM-G-B Manual call point indoor, blue
Analog addressable manual call point with glass pane for indoor use, indirect alarm triggering (type B), blue
Order number FMC-210-DM-G-B
FMC-210-DM-G-GR Manual call point indoor, green
Analog addressable manual call point with glass pane
for indoor use, indirect alarm triggering (type B), green
Order number FMC-210-DM-G-GR
FMC-210-DM-G-R Manual call point indoor, red
Analog addressable manual call point with glass pane
for indoor use, indirect alarm triggering (type B), red
Order number FMC-210-DM-G-R
FMC-210-DM-G-Y Manual call point indoor, yellow
Analog addressable manual call point with glass pane
for indoor use, indirect alarm triggering (type B),yellow
Order number FMC-210-DM-G-Y
FMC-210-DM-H-B Manual call point outdoor, blue
Analog addressable manual call point with glass pane
for outdoor use, indirect alarm triggering (type B),blue
Order number FMC-210-DM-H-B
FMC-210-DM-H-R Manual call point outdoor, red
Analog addressable manual call point with glass pane
for outdoor use, indirect alarm triggering (type B), red
Order number FMC-210-DM-H-R
Accessories
FMX-FSO-LSN FMX-FSO-LSN foilset operating panel MCP
For the labeling field of manual call points of the series
FMC-210, 1 unit = 10 sheets
Order number FMX-FSO-LSN
FMC-FST-DE Foil set, transparent
For yellow and blue manual call points of the series
FMC-120 and FMC-210, 1 unit = 5 sheets
Order number FMC-FST-DE
FMC-SPGL-DEIL Spare glass
For manual call points of series DM, DKM, SKM,
FMC-120 and FMC-210, 1 unit = 5 spare glasses
Order number FMC-SPGL-DEIL
FMM-KEY-FORM G/H Key for manual call point
made of red plastic (ASA)
Order number FMM-KEY-FORM G/H
More Products
