Introduction
BOSCH PLE-2MA240-EU 240 W Hybrid Amplifier, 2-zone F.01U.033.716 PLE 2MAxx0 EU Spot Hybrid Amplifier
Business Type: PLE-2MA240-EU
Product number: F.01U.033.716

PLE 2MAxx0 EU Spot Mixed Amplifier
6-way microphone/line input and 3-way music source input
100V, Telephone and Call Station Input (with Priority and VOX)
2 Regions and Broadcast Output Limited
Voice Activation Emergency Control Button
120 and 240W High Output Power
Built-in 2-tone reminder tone (there are 7 other reminder tones available for call station selection)
Output Interface for Line Output, Music Output Only and Insertion Point
24V standby input with built-in 24V charger
Individual Sound Controller for Microphone and Music Source
Main power supply
Voltage 115 - 230VAC + 10%, 50/60Hz
PLE-2MA120-EU inrush current 8/16 A (230/115 VAC)
PLE-2MA240-EU inrush current 9/19 A (230/115 VAC)
Battery power supply
Voltage 24 VDC, +10%/15%
PLE-2MA120-EU Current 6A
PLE-2MA240-EU Current 12A
Charging CURRENT 0.5 ADC
Floating Charging Voltage 27.3 VDC
Power waste
PLE-2MA120-EU (Power Supply) 400 VA
PLE-2MA240-EU (Power Supply) 800 VA
performance
Frequency response 50 Hz to 20 kHz (+1/3 dB, 10 dB, reference rated output)
Distortion < 1% (rated output power), 1 kHz
Bass Control Max - 12/+12 dB (Frequency and Settings Dependent)
Tweeter control max. - 12/+12 dB (Frequency is set related)
RJ-45 input 2x
Call station input for PLE-2CS (MM)
Wall panel input for PLE-WP3S2Z
Microphone/line input 6x
Input 1 (i.e. press-and-speak contact, with automatic volume highlighting function) 5-pin European, balanced, phantom 3-pin XLR, balanced, phantom
Input 2-6 (VOX enabled on input 2 [with push-in function]) 3-pin XLR, balanced, phantom
Sensitivity 1 mV (microphone), 1 V (line)
Impedance > 1 kohm (microphone); > 5 kohm (line)
Signal-to-noise ratio (flat at maximum volume) 63 dB
Signal to Noise Ratio (Minimum Volume/Flat at Silence)>5 dB
Dynamic range 93 dB
Signal-to-noise ratio (flat at maximum volume)>63 dB (microphone);>70 dB (line)
Signal to Noise Ratio (Minimum Volume/Flat at Silence)>75 dB
CMRR > 40 dB (50 Hz to 20 kHz)
Remains > 17 dB
Speech filter - 3 dB (315 Hz), high pass, 6 dB/oct
Phantom power supply 16 V, through 1.2 kiloohms (microphone)
Speech filter - 3 dB (315 Hz), high pass, 6 dB/oct
VOX (input 1 and 2) trigger time 150 ms; release time 2 seconds
Music input 3x
Connector Lotus Blossom, Stereo to Mono Channel
Sensitivity 300 mV
Impedance 22 kohm
Signal-to-noise ratio (flat at maximum volume)>70 dB
Signal to Noise Ratio (Minimum Volume/Flat at Silence)>75 dB
Remains > 25 dB
Emergency/Telephone 1x
Connector 7 pins, European pluggable screw terminal
Maximum Telephone Sensitivity 1 V
Sensitivity 100 V Max 100 V
Impedance > 10 kohm
Signal-to-noise ratio (flat at maximum volume)>65 dB
VOX threshold 50 mV; trigger time 150 ms; release time 2 seconds
Insert 1 x
Connector Lotus Blossom
Rated level 1V
Impedance > 10 kohm
Main/Music Output 1x
Connector 3-pin XLR, equalization
Rated level 1V
Impedance < 100 ohm
Speaker Output 100 V*
Connector screw, floating
PLE-2MA120-EU Maximum/Rating 180W/120W
PLE-2MA240-EU Maximum/Rating 360W/240W
Speaker Output 4 Ohms*
Connector European pluggable screw terminal, floating
PLE-2MA120-EU 22V (120 W)
PLE-2MA240-EU 31 V (240 W)
Dimensions (high x width x depth) 100 x 430 x 270 mm (19 inches wide, 2U high)
Installation of stand-alone, 19-inch rack
Color carbon black
Weight (PLE-2MA120-EU) is about 10.5 kg
Weight (PLE-2MA240-EU) about 12.5 kg
Working temperature - 10 C to + 45 C
Storage and transportation temperatures - 40 C to + 70 C
Relative humidity < 95%
Fan Noise Level < 33 dB Sound Pressure Level, 1 m, Temperature Control
Product variables
PLE-2MA120-EU 120 W Hybrid Amplifier, Area 2 China CN: 5,358 F.01U.066.847
PLE-2MA120-EU Priority Hybrid Amplifier, Zone 2, 120W
Hybrid amplifier, 120 W, 10 inputs.
Business Type: PLE-2MA120-EU
Product number: F.01U.066.847
PLE-2MA240-EU 240 W Hybrid Amplifier, Area 2 China CN: 7,856 F.01U.033.716
PLE-2MA240-EU Priority Hybrid Amplifier, Zone 2, 240W
Hybrid amplifier, 240 W, 10 inputs.
Business Type: PLE-2MA240-EU
Product number: F.01U.033.716
Business Type: PLE-2MA240-EU
Product number: F.01U.033.716

PLE 2MAxx0 EU Spot Mixed Amplifier
6-way microphone/line input and 3-way music source input
100V, Telephone and Call Station Input (with Priority and VOX)
2 Regions and Broadcast Output Limited
Voice Activation Emergency Control Button
120 and 240W High Output Power
Built-in 2-tone reminder tone (there are 7 other reminder tones available for call station selection)
Output Interface for Line Output, Music Output Only and Insertion Point
24V standby input with built-in 24V charger
Individual Sound Controller for Microphone and Music Source
Main power supply
Voltage 115 - 230VAC + 10%, 50/60Hz
PLE-2MA120-EU inrush current 8/16 A (230/115 VAC)
PLE-2MA240-EU inrush current 9/19 A (230/115 VAC)
Battery power supply
Voltage 24 VDC, +10%/15%
PLE-2MA120-EU Current 6A
PLE-2MA240-EU Current 12A
Charging CURRENT 0.5 ADC
Floating Charging Voltage 27.3 VDC
Power waste
PLE-2MA120-EU (Power Supply) 400 VA
PLE-2MA240-EU (Power Supply) 800 VA
performance
Frequency response 50 Hz to 20 kHz (+1/3 dB, 10 dB, reference rated output)
Distortion < 1% (rated output power), 1 kHz
Bass Control Max - 12/+12 dB (Frequency and Settings Dependent)
Tweeter control max. - 12/+12 dB (Frequency is set related)
RJ-45 input 2x
Call station input for PLE-2CS (MM)
Wall panel input for PLE-WP3S2Z
Microphone/line input 6x
Input 1 (i.e. press-and-speak contact, with automatic volume highlighting function) 5-pin European, balanced, phantom 3-pin XLR, balanced, phantom
Input 2-6 (VOX enabled on input 2 [with push-in function]) 3-pin XLR, balanced, phantom
Sensitivity 1 mV (microphone), 1 V (line)
Impedance > 1 kohm (microphone); > 5 kohm (line)
Signal-to-noise ratio (flat at maximum volume) 63 dB
Signal to Noise Ratio (Minimum Volume/Flat at Silence)>5 dB
Dynamic range 93 dB
Signal-to-noise ratio (flat at maximum volume)>63 dB (microphone);>70 dB (line)
Signal to Noise Ratio (Minimum Volume/Flat at Silence)>75 dB
CMRR > 40 dB (50 Hz to 20 kHz)
Remains > 17 dB
Speech filter - 3 dB (315 Hz), high pass, 6 dB/oct
Phantom power supply 16 V, through 1.2 kiloohms (microphone)
Speech filter - 3 dB (315 Hz), high pass, 6 dB/oct
VOX (input 1 and 2) trigger time 150 ms; release time 2 seconds
Music input 3x
Connector Lotus Blossom, Stereo to Mono Channel
Sensitivity 300 mV
Impedance 22 kohm
Signal-to-noise ratio (flat at maximum volume)>70 dB
Signal to Noise Ratio (Minimum Volume/Flat at Silence)>75 dB
Remains > 25 dB
Emergency/Telephone 1x
Connector 7 pins, European pluggable screw terminal
Maximum Telephone Sensitivity 1 V
Sensitivity 100 V Max 100 V
Impedance > 10 kohm
Signal-to-noise ratio (flat at maximum volume)>65 dB
VOX threshold 50 mV; trigger time 150 ms; release time 2 seconds
Insert 1 x
Connector Lotus Blossom
Rated level 1V
Impedance > 10 kohm
Main/Music Output 1x
Connector 3-pin XLR, equalization
Rated level 1V
Impedance < 100 ohm
Speaker Output 100 V*
Connector screw, floating
PLE-2MA120-EU Maximum/Rating 180W/120W
PLE-2MA240-EU Maximum/Rating 360W/240W
Speaker Output 4 Ohms*
Connector European pluggable screw terminal, floating
PLE-2MA120-EU 22V (120 W)
PLE-2MA240-EU 31 V (240 W)
Dimensions (high x width x depth) 100 x 430 x 270 mm (19 inches wide, 2U high)
Installation of stand-alone, 19-inch rack
Color carbon black
Weight (PLE-2MA120-EU) is about 10.5 kg
Weight (PLE-2MA240-EU) about 12.5 kg
Working temperature - 10 C to + 45 C
Storage and transportation temperatures - 40 C to + 70 C
Relative humidity < 95%
Fan Noise Level < 33 dB Sound Pressure Level, 1 m, Temperature Control
Product variables
PLE-2MA120-EU 120 W Hybrid Amplifier, Area 2 China CN: 5,358 F.01U.066.847
PLE-2MA120-EU Priority Hybrid Amplifier, Zone 2, 120W
Hybrid amplifier, 120 W, 10 inputs.
Business Type: PLE-2MA120-EU
Product number: F.01U.066.847
PLE-2MA240-EU 240 W Hybrid Amplifier, Area 2 China CN: 7,856 F.01U.033.716
PLE-2MA240-EU Priority Hybrid Amplifier, Zone 2, 240W
Hybrid amplifier, 240 W, 10 inputs.
Business Type: PLE-2MA240-EU
Product number: F.01U.033.716
More Products