安讯士T8613 AXIS SFP千兆以太网模块AXIS T8613 SFP Module 1000BASE-T
2018-4-18 18:17:56 点击：
安讯士T8613 AXIS SFP千兆以太网模块AXIS T8613 SFP Module 1000BASE-T
Ethernet module for expansion of network ports
安讯士T8613 SFP模块的千兆以太网
用于扩展网络端口的以太网模块
高达100米的链路长度
链路损耗特性
工业级扩展温度范围
集成RJ45连接器
符合SFP MSA和IEEE802.3
轴t8613 SFP模块的千兆以太网是一个小型可插拔（SFP）收发器供应网络设备，如交换机或路由器，有网络连接。它是工业级的，具有宽的温度范围（在40°C到65°C之间），并且包括使网络冗余性丧失的信号特征。
符合SFP多源协议（MSA）和IEEE802.3，易于安装到兼容的端口时无需中断的主机设备在线运行。轴t8613可以处理1.25 Gbps的超过4对5类UTP电缆长度可达100米的链接。该模块使用一个集成的RJ45连接器，并进行试验和轴等产品的轴t8516 PoE +网络交换机验证。
网络冗余链路丢失特征
信号丢失（LOS）特征允许系统识别特定硬件（例如，轴网络摄像机）和主机之间的丢失连接。优化的网络冗余，t8613信号轴在连接丢失或不可用的网络流量情况下的硬件连接。这允许硬件通过回退连接重定向网络流量。
- Up to 100 m link length
- Link-loss feature
- Industrial grade – extended temperature range
- Integrated RJ45 connector
-
Complies with SFP MSA and IEEE802.3
AXIS T8613 SFP Module 1000BASE-T is a small form-factor pluggable (SFP) transceiver that supplies network devices, such as a switches or routers, with a network connection. It is industrial grade with a wide temperature range (between -40 °C to 65°C), and it includes loss of signal feature that enable network redundancy.
Complying with SFP Multisource Agreement (MSA) and IEEE802.3, it is easy to install into compliant ports at any time without interrupting the online operation of the host equipment. AXIS T8613 can handle 1.25 Gbps over a 4-pair Category 5 UTP cable with up to 100 m link length. The module uses an integrated RJ45 connector, and is tested and verified with Axis products such as AXIS T8516 PoE+ Network Switch.
Link-loss feature for network redundancy
The loss of signal (LOS) feature allows for the system to recognize a lost connection between a specific hardware (For example, AXIS Network Cameras) and the host. For optimized network redundancy, AXIS T8613 signals the hardware in case of a lost connection or unusable connection for network traffic. This allows for the hardware to redirect the network traffic through a fallback connection.
- 上一篇：安讯士T8129 AXIS PoE 延长器 2018/4/18
- 下一篇：安讯士 PIR 运动侦测器,AXIS P8221,AXIS 2018/4/18
